Epson 386/25 VTEST, SETVESA 32, SETVESA 64, SETVESA 128, Using VTEST

You cannot enter the following settings:

SETVESA 32 1SETVESA 128 2

If you enter the command without any parameters, SETVESA displays the current settings on the screen.

Follow these steps to use the SETVESA utility:

1.If necessary, log onto the directory containing the SETVESA.EXE utility file.

2.Type the SETVESA command followed by the parameters you want to use and press Enter, as in the following example:

SETVESA 64 2Using VTEST

The VTEST utility tests the VESA driver and displays the results of the test on your monitor screen. Follow these steps:

1.If necessary, log onto the directory containing the VTEST.EXE utility file.

2.Type the following and press Enter:

VTEST

3.VTEST displays information about the first mode it will test. Press any key to begin testing.

4.VTEST tests various aspects of each mode and displays the results on the screen. At the end of the test, you see the MS-DOS prompt.

A-56 Using the VGA Utilities