If the list correctly describes your system, make sure Y is highlighted and press Enter. If a device is missing from this list,

or if you want to change the list, press N or and Enter. Then see “Modifying the Device List” on page E-5.

Note

If your system uses the built-in VGA adapter or an EGA or VGA card with a color monitor, your device list should include item 5, Color graphics adapter and CRT. If your system uses the built-in VGA adapter or an EGA or VGA card with a monochrome monitor, your device list should include item 4, Monochrome display adapter and CRT.

After you confirm the Device List, you can test only those items. If you decide later that you need to add a device, you must return to the Operation Menu and reselect System

d i a g n o s t i c s .

Note

After you have installed MS-DOS, you should always boot the computer from your hard disk or from the Startup diskette to use MS-DOS. When you are finished running system diagnostics, remove the Reference diskette from drive A.

If you do not have a hard disk, insert the Startup diskette. Then reset your computer to make sure it performs all the commands in the CONFIG.SYS and AUTOEXEC.BAT files.

Performing System Diagnostics

E-3