Chapter 2 describes how to run the Setup program to define your computer’s configuration. Do this before you use your computer. You may need to do it again later if you change the configuration.

Chapter 3 provides instructions for important operating procedures, such as using and caring for disks and disk drives.

Chapter 4 describes specialized features you can use to enhance your system’s performance.

Chapter 5 describes some of the options you can use in your computer and contains instructions for removing the cover, setting jumpers, and installing options.

Appendix A provides instructions for using the VGA device drivers and utilities.

Appendix B explains how to install and remove a hard disk or diskette drive.

Appendix C describes how to perform a hardware-level format on a hard disk. You need to do this only if you have installed a new hard disk that has never received this type of low-level format, or if you are having serious problems with the disk.

Appendix D contains troubleshooting tips.

Appendix E outlines the system diagnostics checks. If you are having trouble with any part of the hardware, you may want to run some of these.

Appendix F gives the technical specifications for the computer.

At the end of the manual, you’ll find a glossary and an index.

4Introduction