4. Using a 24-hour clock, enter the time in the exact format shown in the box. Type two digits for each part; the Setup program automatically inserts the colons ( : ). For example, to set the time to 1:30 p.m., you would type the following:

1 3 3 0 0 0

You can use the backspace key to make corrections. When the time is correct, press Enter. If you enter an invalid time-for example, a number greater than 23 for the hours or greater than 59 for the minutes or seconds-the computer ignores your entry. Try again.

5. To set or change the date, highlight Date and press Enter. You see this box:

(“mm” stands for month, “dd” stands for day, and “yyyy” stands for year.)

6. Enter the date in the exact format shown in the box. Use two digits for the month and day, and four digits for the year; the Setup program automatically inserts the hyphens. For example, to set the date for December 29,1990, you would type the following:

1 2 2 9 1 9 9 0

You can use the backspace key to make corrections. When the date is correct, press Enter. If you enter an invalid date-for example, a number greater than 12 for the month or greater than the number of days in that month-the computer ignores your entry. Try again.

7. Press once or twice to return to the main Setup menu.

Running the Setup Program

2-19