Epson 386/25 Caution, Position, supply connector P4 so the large tab on the

4.Position power supply connector P4 so the large tab on the connector faces the right side of the computer. Beginning with the six pins toward the back of the computer, carefully line up the holes in the connector with the pins in the socket. Make sure the holes fit over all six pins and then push the connector onto the pins.

Caution

If you do not correctly align the holes with the pins in the socket, you could severely damage your computer when you push in the connector.

5.Connect power supply connector P5 to the remaining six pins in the socket using the same procedure.

6.Still holding up the subassembly, locate the hard disk drive and diskette drive ribbon cables. (The hard disk drive cable is slightly longer than the diskette drive cable.) Look at the back of each drive to make sure you know which cable is which.

Installing and Removing Disk Drives B-51