5.If you still do not see anything on the screen, make sure your monitor is connected to the computer properly. See “Connecting a Monitor” in Chapter 1 for more details. Also check the monitor manual for instructions on how to connect it to the computer.

6.Make sure your monitor and display adapter match, and, if you installed a display adapter card, be sure any switches or jumpers on the card are set properly. See “Connecting a Monitor” in Chapter 1 and the documentation that came with your monitor and display adapter card for instructions.

7.Be sure you have chosen the correct display adapter type in the Setup program. See “Setting the Display Adapter Type” in Chapter 2.

8.If you are running an application program, see if you need to set up the program for the type of monitor and display adapter you have. Also make sure you are using the appropriate monitor and display adapter for your software.

Note

If your application program requires a monitor that supports graphics but you have a monochrome monitor, the results will be unpredictable.

9.If you installed an EGA or VGA display adapter card, or another type of card that you want to be the primary display adapter, you must set jumper JP14 to disable the built-in VGA adapter. Otherwise, you will not see any display on the screen. See “Changing the Jumper Settings” in Chapter 5 for instructions.

If you are using one or more display adapter cards, you may need to change the setting of jumper JP12. This jumper tells the computer whether you are using a color or monochrome monitor. (JP12 is set for color at the factory.)

D-14 Troubleshooting