5.Press the space bar until you see one of the following options:

CHIPS 1024x768

CHIPS 800x600

6.Select the driver you want to use.

7.Exit VersaCAD.

Modifying the VersaCAD Batch File

Before you use VersaCAD with the new display driver, you need to modify the VersaCAD batch file. Follow these steps:

1.If necessary, log onto the root directory of your hard disk.

2.Use the EDLIN utility to edit the file VCAD54.BAT, as described in the following steps. (See your MS-DOS Reference Manual for instructions on using EDLIN.)

3.The second line of the VCAD54.BAT file contains the command to load the display driver. Change the name of the current driver file to the name of the new driver file for the resolution you chose. (The new driver filenames are listed at the beginning of this section.)

For example, if you want to use the 1024 x 768, 16-color graphics driver, change the filename to the following:

EGA768.EXE

4.Save the new batch file as you exit the EDLIN utility.

5.Hold down Ctrl and Alt and press Del to reset the computer.

Using the VGA Utilities

A-47