2.To change any of the settings, press Enter. The cursor block moves into the submenu and the Speaker option is highlighted.

3.To enable or disable the speaker (turn it on or off), press

Enter.

4.To turn the initial num lock setting on or off, highlight

Initial num lock and press Enter.

5.To change the keyboard repeat rate, highlight

KB repeat rate. You see the following option menu:

6. Press Enter to move the cursor block into the menu.

7. Use or to highlight the speed you want and press Enter.

8.Highlight *** SAVE SETTINGS * * * and press

Enter to return to the main Setup menu.

Setting the Real-time Clock

The real-time clock in your computer continuously tracks the time and date-even when the computer is turned off. The first time you run Setup, use the Real-time clock option to set the time and date for your computer. You may need to use this option again later to adjust your clock for daylight savings time. The computer automatically changes the date for leap years.

Running the Setup Program

2-17