Epson 386/25 this:, 0 - Exit, Selecting an Option, want to select that, 1 - Run test one time, 2 - Run test multiple times

Selecting an Option

When you are using the System diagnostics program, you often need to select an option from a menu. There are two ways to do

this:

❏ You can use the arrow keysto highlight the option you want and then press Enter to select it.

❏You can type the number of the desired option and press Enter to select it.

For example, you may see this menu:

1 - Run test one time2 - Run test multiple times0 - Exit

Suppose the first option is highlighted. If you want to select that option, just press Enter (because it is already highlighted). If you want to select option 2, you can either press 1 or 2; this causes the cursor block to move to that option. Then press Enter to select it.

Note

You can press ESC any time you want to leave the menu currently displayed and return to the previous one.

E-4 Performing System Diagnostics