Solving Problems 117

 

 

 

 

 

 

 

 

 

 

Message

Light

Explanation

Response

 

 

 

 

 

 

 

 

 

 

INK LOW

B Ink light

Ink cartridge(s) are

Make sure you have replacement cartridges

 

flashing

nearly empty (printing

available. See page 100.

 

 

 

 

 

 

 

 

continues).

 

 

 

 

 

 

 

 

 

 

 

INK OUT

B Ink light on

Ink cartridge(s) are

Replace the ink cartridge(s) indicated on the

 

 

 

 

 

 

 

 

empty (printing stops).

LCD panel. See page 100 for instructions.

 

 

 

 

 

 

 

 

 

 

INVALID INK

B Ink light on

You tried to install the

If you are installing ink cartridges for the first

CARTRIDGE

 

 

 

 

 

 

 

wrong ink cartridge.

time, you must install the cartridges that came

 

 

 

 

 

 

 

 

 

with your printer.

 

 

 

 

 

 

 

 

 

If you are replacing ink cartridges, check the

 

 

 

 

 

 

 

 

 

package and product code. You must use the

 

 

 

 

 

 

 

 

 

ink cartridges designed for your printer. Other

 

 

 

 

 

 

 

 

 

cartridges will not work.

 

 

 

 

 

 

 

 

 

 

LOAD PAPER

 

 

 

 

 

 

Paper light

Paper lever is in the

After you finish loading paper, pull the paper

 

 

 

 

 

 

 

on

released position while

lever all the way forward, to the secured

 

 

 

 

 

 

 

 

loading paper.

position.

 

 

 

 

 

 

 

 

 

 

LOAD ROLL

 

 

 

 

 

 

Paper light

Paper source setting in

Make sure the right paper is loaded and the

 

 

 

 

 

 

PAPER

 

on

 

printer software is

paper source setting is the same on the control

LOAD SHEET

 

 

 

 

 

 

 

different from control

panel and printer software.

 

 

 

 

 

 

 

panel.

 

PAPER IN P.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOWER INK

One or both ink levers

Pull the lever or levers down to lock the ink

LEVERS

 

 

 

 

 

 

 

are raised.

cartridges.

LOWER L (or R)

 

 

 

 

 

 

 

 

 

INK LEVER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MNT REQ.

A printer part will need

Note the code number and contact EPSON as

 

 

 

 

 

 

 

 

to be replaced soon.

described on page 11.

 

 

 

 

 

 

 

 

 

 

MNT TNK NEAR

The maintenance tank

Make sure you have a replacement

FULL

 

 

 

 

 

 

 

is almost full.

maintenance tank. See page 109.

 

 

 

 

 

 

 

 

 

 

MNT TNK FULL

B Ink light on

The maintenance tank

Replace the maintenance tank. See page 109

 

 

 

 

 

 

 

 

is full.

for instructions.

 

 

 

 

 

 

 

 

 

 

NO BORDERLESS

Borderless setting

Change the setting in the printer driver, or load

WITH THIS SIZE

 

 

 

 

 

 

 

selected for A2-size

different-size paper.

 

 

 

 

 

 

 

 

sheets (11.7 × 16.5)

 

 

 

 

 

 

 

 

 

 

 

NO MNT TNK

The maintenance tank

Make sure the maintenance tank is fully

 

 

 

 

 

 

 

 

is not installed.

inserted. See page 109 for instructions.

 

 

 

 

 

 

 

 

 

 

NOT STRAIGHT

 

 

 

 

 

 

Paper light

Cut sheet paper is not

Load the paper correctly.

 

 

 

 

 

 

RELOAD

on

loaded straight.