94 Maintaining and Transporting the Printer

Note: To test the print quality, see page 96 for instructions on printing a nozzle check.

Checking Printer Status and Part Life

Using the SelecType menus, you can check the amount of ink remaining, the total number of prints, and the status of your cutter blade, maintenance tank, and other printer parts. You can either print out a status check, or you can view the printer’s status on the LCD panel.

Note: You can replace the ink cartridges, cutter blade, and maintenance tank yourself. Other printer parts need to be replaced by an authorized EPSON service technician.

Printing Status Information

The status check sheet shows some of the current default settings, the amount of ink remaining in each cartridge, the page count, and the status of various printer parts.

Follow these steps to print the status check sheet:

1.Make sure paper is loaded in the tray.

2.Press the Menu button. You see PRINTER SETUP.

3.Press the button so you see TEST PRINT, then press Menu . You see NOZZLE CHECK.

4.Press so you see STATUS CHECK, then press Menu . You see

PRINT.

5.Press Menu again to start printing.

The amount of ink left or the component life is indicated as follows:

E*****F = 100–81% ink or service life remaining

E**** F = 80–61%

E***

F = 60–41%

E**

F = 40–21%

E*

F = 20–11%

%= less than 10% ink or service life remaining