134Installing the Optional Print Server Card
5.Slide the card along the slots inside the compartment. Push it in firmly to fully insert the connector into the printer’s internal slot.
6.Use the two screws included with the card to secure it.
7.Connect one end of the appropriate cable to the card. Then connect the other end to your computer’s Ethernet port or hub.
8.Plug in the printer’s power cord.
Once the printer is connected to your network, you need to configure it. Turn on the printer and press the small black button on the back of the Ethernet card. Hold it down until the printer starts printing a series of status sheets. See the documentation that came with the print server for instructions on configuring it for your network.
WARNING: The card will be hot after printing. Make sure you allow the card to cool before handling it.
If you need to exchange your printer, you must remove the Ethernet card.
1.Turn off the printer and disconnect the power cord.
2.Disconnect the Ethernet cable.
3.Remove the two screws securing the card.
4.Make sure the card is cool before pulling it out of the slot.