Note: These settings override settings made through the control panel.

Printing with EPSON Drivers for Macintosh 53

2.Choose one of the following Auto Cut settings:

•Normal Cut allows margin space at the top and bottom of each image.

•Double Cut extends the space between the images and trims each print individually. This provides the cleanest edge for borderless printing.

•Single Cut causes the images to be printed end-to-end and saves paper. With borderless printing, you may see a sliver of the previous or next image.

•Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, print multiple print jobs without cutting, or if you are printing on heavy media that must be cut with scissors.

See page 38 for instructions on using the button to operate the cutter. See page 32 for a list of media that do not work with the built-in cutter.

3.Select either of the following options:

•Print Page Line prints trim lines on the right and bottom edges of your pages.

•Save Roll Paper saves paper by not feeding the blank portion of the last page of your document. Available only when you’ve selected

Roll Paper (Banner) as the Paper Source.

Note: If you check the settings on each screen in the pull-down menu, go through them carefully from top to bottom. Avoid cycling through them repeatedly, or you may lose your settings.

Creating a Custom Preset and Printing

Once you’ve made the correct settings for your print job, create a custom preset. This will save you time when you use the same profile/printer/ink/media combination for future print jobs.

1. Select Summary from the pull-down menu.

2.After verifying that your settings are correct, select Save As from the Presets pull-down menu.