Maintaining and Transporting the Printer 95
Viewing Status Information
To view printer status information instead of printing it, follow these steps:
1.Press the Menu 
button. You see PRINTER SETUP.
2.Press the 
button until you see PRINTER STATUS, then press
Menu 
. You see VERSION.
3.Do one of the following:
•To check the firmware version, press Menu 
again. When done, press the 
button.
•To check the amount of ink left, press 
until you see INK LEFT, then press Menu 
. The status of the first cartridge (MK, or matte black) is displayed, using the E*****F symbols described above. Continue pressing 
to see the status of the remaining cartridges. When done, press the 
button.
•To check how much of the maintenance tank has been used, presss
until you see MAINT TANK, then press Menu 
. The status of the tank is displayed, using the E*****F symbols described above. When done, press the 
button.
•To check the amount of ink used (in milliliters) and paper used (in square meters), press 
until you see USAGE COUNT, then press Menu 
.
You can change the units of measurement from meters to inches and feet by using the maintenance mode on the printer’s control panel. See page 105 for instructions.
•To check job history, press 
until you see JOB HISTORY, then press Menu 
. For each job saved in the printer, you see the ink used (in milliliters) and paper used (in square meters). The most recent job is saved as No. 0. When done, press the 
button.
•To check the total number of prints, press 
until you see TOTAL PRINTS, then press Menu 
. When done, press the 
button.