Appendix A:

Installing the

Optional Print

Server Card

Caution: You must unplug the printer from the power outlet, or you may damage the printer and the card.

133

If you plan to attach the printer to your network, you need the optional EpsonNet print server card. The EpsonNet print server is a 10/100 Base TX Type B Ethernet interface card (part number C12C82405).

You can purchase the print server card and other optional equipment and and supplies from EPSON at (800) 873-7766, or you can visit the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for deaer referral.

Make sure you have the correct cable for connecting the printer. To connect to a network hub, you need a standard RJ-45 “straight-through” network cable. To connect directly to your computer’s network interface, you need an RJ-45 crossover cable.

Before you install the print server, make sure you check the documentation included with the card for additional instructions. Then follow these steps to install the card:

1.Turn off your computer and printer.

2.IMPORTANT: Unplug the printer from its electrical outlet. Not doing so may cause damage to the printer and the card.

3.Disconnect any interface cables from the printer.

4.Use a cross-head screwdriver to remove the two screws securing the optional interface cover. Then lift off the cover as shown:

Make sure you keep the screws in case you need to remove the card and replace the cover.