Note: These settings override settings made through the control panel.

Printing with EPSON Drivers for Macintosh 61

5.Choose one of the following Auto Cut settings:

•Normal Cut allows margin space at the top and bottom of each image.

•Double Cut extends the space between the images and trims each print individually. This provides the cleanest edge for borderless printing.

•Single Cut causes the images to be printed end-to-end and saves paper. With borderless printing, you may see a sliver of the previous or next image.

•Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, print multiple print jobs without cutting, or if you are printing on heavy media that must be cut with scissors. See page 38 for instructions on using the button to operate the cutter.

6.Make the settings you want for Orientation and Reduce or Enlarge.

7.Select any of the following options:

•Auto Rotate saves paper if your document length is shorter than the printable width of the paper roll. Your image is rotated automatically by 90 degrees and printed crosswise.

•Print Page Line prints trim lines on the right and bottom edges of your pages.

•Save Roll Paper saves paper by not feeding the blank portion of the last page of your document. Available only when you’ve selected

Roll Paper (Banner) as the Paper Source.

8.After making your settings, click OK.

9.Print your image.