Note: You may need to change the Color Density setting if your color profile was created to optimize D-max and color gamut.

Printing with EPSON Drivers for Macintosh 51

•No Color Adjustment to disable color management in the printer driver. Choose this mode when you use a color-managed workflow in Photoshop or other software applications.

3.If you are using non-EPSON media and you need to fine-tune its performance, select Paper Configuration from the pull-down menu. You see this screen:

Select the Paper

Configuration page

4.Select the correct settings to match your ICC profile. These settings override any paper configuration settings you may have made using the printer’s control panel.

•Color Density lets you control the ink saturation level (for example, when you turn off color management in your printer software).

•Drying Time per Print Head Pass lets you print with non-EPSON media and avoid smearing the ink. You can make the print head wait up to 5 seconds after each pass to allow ink to dry on the page.

•Paper Feed Adjustment helps reduce banding. Choose a lower value if you see white lines on your prints, or a higher value if you see dark lines.