14 Introduction
Caution: Always turn the printer off using the
Ppower button. When you press this button, POWER OFF appears on the LCD panel. Do not unplug the printer or turn off the power to the printer until the panel shuts off. This ensures that the print head is safely capped.
•Do not store paper or other material on top of the printer. Doing so can interfere with the paper sensors.
•Keep the entire system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.
•Place the printer on a flat surface. It will not operate properly if it is tilted or at an angle.
•If you use a stand, make sure it can support at least 110.3 lb (50 kg)
•Do not block or cover the openings in the printer case or insert objects through the slots.
•Use only the type of power source indicated on the label.
•Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. Do not use outlets controlled by wall switches or timers.
•Place the printer near a wall outlet where the plugs can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.
•Do not let the power cords become damaged or frayed.
•If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
•Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer.
•Except as specifically explained in the documentation, do not attempt to service the printer yourself. Opening or removing those covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks. Refer all servicing in those compartments to service personnel.