Removing a Hard Disk Drive From the Mounting Bracket

You may need to remove a hard disk drive for service or for replacement.

Caution

Before you remove a hard disk drive, make sure you have backup copies of all your files and programs. You can use backup software or the backup utility in your operating system. Refer to the online help files or software documentation for instructions.

If your system included a Recovery CD-ROM, it contains an image of your hard drive as it was configured at the factory. You can use this CD-ROM to restore the original files that came on the hard drive; you cannot restore any data files you have created.

Follow these steps to remove a hard disk drive from the bracket:

1.Disconnect the cables from the back of the hard disk drive and diskette drive in the bracket. Grasp the connectors and pull them straight out so you do not bend the pins; do not pull on the cables.

2.Remove the screws securing the bracket to the drive bay and brace.

Installing and Removing Slimline Drives

5-13