Note

Your system includes five power supply cables; three with full-size connectors and two with smaller connectors. If you need more than these five connectors, you can purchase Y-adapters for power supply cables at most computer accessory stores. A Y-adapter allows you to use one connector for two devices.

9.If you have finished installing or removing drives, replace the computer’s cover, as described under “Replacing the Cover” in Chapter 4. Then see “Using the Fixed Disk Setup 0ption” in Chapter 2 for instructions on defining your new drive configuration.

Removing a Drive From the Rear Internal Bracket

You may need to remove a hard disk drive for service or replacement.

Caution

Before you remove a hard disk drive, make sure you have backup copies of all your files and programs. You can use backup software or the backup utility in your operating system. Refer to the online help files or software documentation for instructions.

If your system included a Recovery CD-ROM, it contains an image of your hard drive as it was configured at the factory. You can use this CD-ROM to restore the original files that came on the hard drive; you cannot restore any data files you have created.

6-20 Installing and Removing Tower Drives