7.If you are installing a CD-ROM drive, you will need to connect the audio cable; it has small plastic connectors at either end. Follow the instructions that came with your sound card to connect the audio cable to the card. If you need to install a sound card, follow the instructions under “Installing an Option Card” in Chapter 4.

8.Position the audio cable connector so that the tab faces up and aligns with the notch in the CD-ROM drive’s audio connector. Then push in the connector.

9.If you installed a hard disk drive, replace the plastic faceplate for the bay you used. Insert one side of the plate, then gently press on the other side until it snaps into place.

10.If you have finished installing or removing drives, replace the computer’s cover, as described under “Replacing the Cover” in Chapter 4. Then see “Using the Fixed Disk Setup 0ptions” in Chapter 2 for instructions on defining your new drive configuration.

6-14 Installing and Removing Tower Drives