5.If you are inserting different SIMMs, follow the instructions under “Inserting SIMMs” to install them.

6.Replace any option cards you removed, as described under “Installing an Option Card.”

7.Replace the computer’s cover as described under “Replacing the Cover. “Then see “Post-installation Procedures” for instructions on configuring your computer with your new memory size.

Installing an Option Card

This section explains how to install option cards in your computer. Your computer has five slots; the three large slots are ISA compatible, and two smaller slots are PCI compatible.

Note

The two PCI slots are identified as PCI1 and PCI2 on the option slot connector card. The computer’s SETUP program refers to the slot number as it configures PCI cards, so note the slot you use for each card you install.

The slot nearest the system board accommodates only a half-length card. On the slimline computer, the slots facing the power supply also accommodate only half-length cards.

Caution

Before you install any option cards in your system, make sure that each card does not draw more current than the limits listed in Appendix A.

4-20 Installing and Removing Options