4.Push the SIMM into the socket until it is seated firmly in the

slot. Then tilt

it upright, as shown below, guiding the hole

at each end of

the SIMM over the retaining post at each end

of the SIMM socket. If it does not go in smoothly, do not

force it; pull it

all the way out and try again.

5.Replace any option cards you removed. (See “Installing an Option Card” for instructions.)

6.Replace the computer’s cover as described under “Replacing the Cover. “Then see “Post-installation Procedures” for instructions on configuring your computer with your new memory size.

4-18 Installing and Removing Options