Once the connectors reach the slot, push the card in firmly (but carefully) to insert it fully. You should feel the card fit into place. If it does not go in smoothly, do not force it; pull the card all the way out and try again.
4.Secure the end of the card to the computer with the retaining screw.
Installing a Card in the Slimline Computer (2-slot Side)
The option card connector board in the slimline computer has two slots on one side and three slots on the other side.
Follow these steps to install an option card on the
1.Remove the retaining screw securing the slot cover bracket. Remove the bracket by lifting it straight up and out of the small metal holder at the bottom.
2. Remove the slot cover for the slot you are going to use.
Installing and Removing Options |