When you leave SETUP, you can save your settings or exit SETUP without saving your settings. You can also return all values to the factory defaults.
To leave SETUP, press ESC from any SETUP screen. From the SETUP Main Menu, you can perform the functions described in the table below.
Exiting SETUP options
Option | Description |
|
|
Load ROM Default Values | Loads the factory default settings stored in |
| ROM back into CMOS. If you change your |
| system configuration using the SETUP |
| program and then have problems, you |
| can load ROM values to boot the system |
| and start over. |
|
|
Load Values from CMOS | Loads the current values stored in CMOS |
| for all SETUP options. This ignores any |
| changes you have made through SETUP. |
|
|
Save Values to CMOS | Saves the changes you have made to your |
| configuration to CMOS. |
|
|
You can also select these options from the Main Menu. Press ESC to exit SETUP and restart your computer.
Installing the PCI IDE Drivers
All the files and drivers you need for the operating system on your computer are already installed. If you switch to another operating system, such as NetWare® , you may want to install PCI IDE drivers, which let you take advantage of the