3.Hold the card along the top corners and guide it into the slot

(If you are

installing a full-length card, insert the front edge

of the card into the corresponding guide inside the

computer’s

front panel.)

Once the connectors reach the slot, push the card in firmly but carefully. You should feel the card fit into place. If it does not go in smoothly, do not force it; pull the card all the way out and try again.

4.Secure the end of the card to the computer with the retaining screw.

5.Replace the computer’s cover as described under “Replacing the Cover.” Then see “Post-installation Procedures” for instructions on configuring your computer with your new option card.

4-26 Installing and Removing Options