Connecting a Parallel or Serial Device

Your computer has one multi-mode parallel (printer) port and two serial ports. To connect a printer or other peripheral device, refer to the illustrations under “Connecting System Components” as you follow the appropriate instructions in this section.

Using the parallel (printer) port

Follow these steps to connect a parallel device to your computer:

1.Place the parallel device and the computer so that the backs are facing you.

2.Align the connector end of the parallel cable with the printer port and plug it in. If the connector has retaining screws, tighten them.

This icon identifies the printer port.

3.Connect the other end of the cable to the parallel device. To secure the cable, squeeze the clips at each side of the device port and push them into place.

4.Plug the parallel device’s power cord into a grounded electrical outlet.

If you want to take advantage of the port’s extended capabilities, see “Using the Advanced System Setup Options” in Chapter 2.

1-6Setting Up Your System