Installing a Card in the Slimline Computer (3-slot Side)

The option card connector board in the slimline computer has two slots on one side and three slots on the other side. Although the illustration shows an ISA card, you can use the same instructions for installing a PCI card.

Follow these steps to install an option card on the three-slot side:

1. Remove the retaining screw securing the option slot cover to the computer, as shown below. (Keep the screw to secure the option card to the computer.)

2.Slide out the slot cover and set it aside. (Store it in a safe place in case you remove the option card later.)

3.Hold the card along the top corners and guide it into the slot, as shown below. (If you are installing a full-length card insert the front edge of the card into the corresponding guide inside the computer’s front panel.)

4-22 Installing and Removing Options