Epson Epson Integrated Peripherals

The Integrated Peripherals options are described in the table below.

Integrated	peripherals options
Option		Settings		Description
COM Port 1		3F8, IRQ4 * (COM1)		Assign the address for the built-in
COM Port 2		2F8, IRQ3 * (COM2)		primary and	secondary serial
		338, IRQ4		ports: the Auto setting detects any
		238, IRQ3		optional ports you may have
		3E8,	IRQ4	installed and sets the built-in ports
		2E8, IRQ3		automatically based on the
		2E8,	IRQ4	optional port settings to avoid
		2E0,	IRQ3	conflicts (if no optional ports are
		220,	IRQ4	installed, Auto sets the built-in
		228,	IRQ3	ports to their default settings): the
		Auto		Disabled setting disables the port
		Disabled
LPT Port		378, IRQ7 *		Assigns the address for the built-in
		278,	IRQ7	parallel port: the Auto setting
		Auto		detects any optional ports you
		Disabled		may have installed and sets the
				built-in port automatically based
				on the optional port settings to
				avoid conflicts (if no optional ports
				are installed, Auto sets the built-in
				port to the default setting): select
				Disabled to disable the port
LPT Mode		Standard		Selects unidirectional AT mode
		Bi-Directional *		Selects PS/2 bidirectional mode
		ECP		Selects Extended Capabilities Port
				bidirectional	mode
Floppy		Enabled *		Enables or disables the built-in
Controller		Disabled		diskette drive controller

* Default setting

2-8 Running SETUP and Installing Drivers