EPSON AcuLaser M8000 Series User's Guide

Printing and Deleting Reserve Job Data

Print jobs stored on the printer’s memory using the Re-Print Job, Verify Job, and Stored Job options of the Reserve Job function can be printed and deleted using the control panel’s

Quick Print Job Menu. Jobs saved using the Confidential Job option can be printed from the Confidential Job Menu. Follow the instructions in this section.

Note:

❏The RAM Disk setting on the control panel must be set to Normal or Maximum to use the Reserve Job function. We recommend installing optional memory to use this function. For instructions about increasing your printer’s memory, see “Installing a memory module” on page 132.

❏Installing CompactFlash memory on your printer also enables the Reserve Job function. Note that the RAM disk is not available when you install CompactFlash memory on the printer.

Using the Quick Print Job Menu

Follow the steps below to print or delete Re-Print Job and Verify Job data.

1.Make sure the LCD panel displays Ready or Sleep, then press the r Right button to access the control panel menus.

2.Press the d Down button repeatedly until Quick Print Job Menu appears on the LCD panel, then press the r Right button.

3.Use the d Down or u Up button to scroll to the appropriate user name, then press the r Right button.

4.Use the d Down or u Up button to scroll to the appropriate job name, then press the r Right button.

5.Press the r Right button, then use the d Down and u Up buttons to select the number of copies.

To delete the print job without printing any copies, press the d Down button to display Delete on the LCD panel.

6.Press the r Right button to start printing or to delete the data.

Using the Control Panel 104