Epson M8000 Operational Problems, The Ready light does not turn on, The Ready light is on but nothing prints, The printer does not print (Ready light off)

EPSON AcuLaser M8000 Series User's Guide

To print a configuration status sheet from the printer’s control panel, see “Printing a Configuration Status Sheet” on page 105.

To print a configuration status sheet from the printer driver, for Windows, see “Printing a configuration status sheet” on page 205.

Operational ProblemsThe Ready light does not turn on

Cause	What to do
The power cord may not be properly plugged into the	Turn off the printer, check the power cord connections between
electrical outlet.	the printer and the electrical outlet, then turn the printer back on.
The electrical outlet may be controlled by an outside	Make sure that the switch is turned on or plug another electrical
switch or an automatic timer.	device into the outlet to check whether the outlet is operating
	properly.
The circuit breaker switch located on the back of the	Make sure that there is no electrical leakage, and then turn the
printer is off.	circuit breaker switch on. See “Earth leakage circuit protector” on
	page 15.

The printer does not print (Ready light off)

Cause	What to do
The printer is offline.	Press the Start/Stop button once to switch the printer to ready
	status. Make sure that the Ready light turns on.
Some error may have occurred.	Check the LCD panel to see if an error message appears.

The Ready light is on but nothing prints

Cause	What to do
Your computer may not be properly connected to the	Perform the procedure illustrated in the Setup Guide.
printer.

Troubleshooting 185