EPSON AcuLaser M8000 Series User's Guide

Item

Settings (default in bold)

 

 

Toner Alert

Skip, Set

 

 

LCD Contrast

0 to 7 to 15

 

 

RAM Disk*6*7

Off, Normal, Maximum

*1 Available only when the corresponding option is installed.

*2 Available only when you use A4, A3, A5, B4, B5, LT, HLT, LGL, GLT, GLG, B, EXE, or F4 size paper.

*3 Available only for ESC/Page, ESC/P2, FX, or I239X mode.

*4 Not available in PS3.

*5 Not available in PCL.

*6 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. *7 Not available when a CompactFlash memory is installed.

Language

Specifies the language displayed on the LCD panel and that printed on the status sheet.

Time to Sleep

Specifies the length of time until the printer enters the sleep mode if there are no button operations and no jobs to be printed.

Time Out

Specifies the length of the time, in seconds, before a time out when interfaces are being switched automatically. The time before a time out occurs is the length of time from the point when no data is being received from an interface until the point of switching the interface. If the printer has a print job when switching the interface, the printer prints the print job.

Paper Source

Specifies whether paper feeds into the printer from the MP tray, the standard paper cassette, or the optional paper cassette unit.

If you select Auto, paper feeds from the paper source containing paper that matches your Paper Size setting.

Out Bin

Specifies the output tray when the optional Stacker is installed.

Using the Control Panel 73