EPSON AcuLaser M8000 Series User's Guide

❏Do not insert your hand deep into the fuser unit as some components are sharp and may cause injury.

❏Never push objects of any kind through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.

❏Do not sit or lean on the printer. Do not put heavy objects on the printer.

❏Do not use any kind of combustible gases in or around the printer.

❏Never force the printer’s components into place. Although the printer is designed to be sturdy, rough handling can damage it.

❏Do not leave jammed paper inside the printer. This can cause the printer to overheat.

❏Never spill liquid of any kind on the printer.

❏Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and may require repair by a qualified service representative.

❏Do not turn off the printer:

-After turning on the printer, wait until Ready appears on the LCD panel. -While the Ready light is flashing.

-While the Data light is on or flashing. -While printing.

❏The printer has an earth leakage circuit protector on its back. Be sure to ground the printer.

❏Avoid touching the components inside the printer unless instructed to do so in this guide.

❏Follow all warnings and instructions marked on the printer.

❏Except as specifically explained in the printer’s documentation, do not attempt to service this product yourself.

❏Periodically disconnect the plug from the electrical outlet and clean the blades.

❏Do not disconnect the plug while the printer is on.

❏If the printer will not be used for a long time, disconnect the plug from the electrical outlet.

❏Unplug this printer from the wall outlet before cleaning.

❏Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.

Safety Instructions 19