EPSON AcuLaser M8000 Series User's Guide

Need Memory

The printer has insufficient memory to complete the current print job.

To clear this error message, select Clear Warning from the control panel’s Reset Menu. See“How to access the control panel menus” on page 64 for instructions.

To prevent this problem from recurring, add more memory to your printer as described in “Memory modules” on page 235, or reduce the resolution of the image to be printed.

Non-Genuine Toner Cartridge

The installed imaging cartridge is not a genuine Epson product. Installing a genuine imaging cartridge is recommended. The printout and remaining service life of the imaging cartridge displayed on the control panel may be different from those when using genuine Epson imaging cartridge. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson.

Install a genuine Epson product, or Clear All Warnings of the Reset Menu on the control panel to clear the warning message. See “Replacing Consumable Products” on page 147 for instructions on replacing the toner cartridge.

Offline

The printer is not ready to print. Press the Start/Stop button.

Open (wwww Open)

The specified cover (wwww) is not closed securely. Open the cover once, and then close.

Optional RAM Error

The optional memory module may be corrupted or incorrect. Replace it with a new one.

Paper Jam WWWW

The location where the paper jam occurred is displayed at WWWWW. WWWWW indicates the location of the error.

If a paper jam occurs at two or more locations simultaneously, the corresponding multiple locations are displayed.

Using the Control Panel 98