Epson M8000 Print quality decreased, The non-printedside of the page is dirty

	EPSON AcuLaser M8000 Series User's Guide
Cause	What to do
The imaging cartridge may be near the end of its service	If the message on the LCD panel or in EPSON Status Monitor
life.	indicates that the imaging cartridge is near the end of its service
	life, replace the imaging cartridge. See “Replacing Consumable
	Products” on page 147.
	For Windows users, you can also check the remaining service life
	of the imaging cartridge by looking at the Basic Settings tab in
	the printer driver.
There may be a problem with imaging cartridge.	Replace the imaging cartridge. See “Replacing Consumable
	Products” on page 147.
The Density setting may be too dark.	In the printer driver, click Extended Setting on the Optional
	Settings tab, and then lighten the Density setting.
The non-printed side of the page is dirty
Cause	What to do
Toner may have spilled onto the paper feed path.	Clean internal printer components by printing three pages with
	only one character per page.
Print quality decreased
Cause	What to do
The printer cannot print in the required quality level	Check to see if the printout is acceptable. If not, add more memory
because of insufficient memory, and the printer lowers	for a permanent solution or lower print quality temporarily in the
the quality automatically so thatthe printer can continue	printer driver.
printing.	If RAM Disk is set to Maximum or Normal on the control panel, you
	can increase the available memory space by changing this setting
	to Off.

Troubleshooting 193