EPSON AcuLaser M8000 Series User's Guide

Printing an overlaid document

You can select the registered form data from the Paper Source drop-down list on the Basic Settings tab. For registering form data in the Paper Source, see step 6 in “Creating an overlay” on page 55. If overlay form data is not registered in the Paper Source or if you want to make detailed settings, follow the steps below.

1.Click the Advanced Layout tab.

2.Select the Form Overlay check box.

3.Select the Overlay Print check box, then click More Settings. The Form Selection dialog box appears.

4.Make appropriate settings. For details about each setting, see online help.

Note:

If you cannot select the form from the application, access the printer driver from the operating system. For details, see “Accessing the printer driver” on page 204.

5.Click OK.

Saving an overlaid form pre-settings

This function allows you to save the settings you made from “Creating an overlay” on page 55.

1.From the Form Selection dialog box, click Save/Delete. To open the dialog box, see “Printing an overlaid document” on page 57.

2.Type the pre-settings name in the Form Pre-Settings Name box, then click Save. Your pre-settings name will appear in the Form Pre-Settings drop-down list in the Form Selection dialog box.

3.Click OK. Your pre-settings name will appear in the Pre-Settings drop-down list in the Advanced Layout dialog box.

Note:

❏To delete an overlaid form pre-setting, follow the step 1, select the pre-settings name you want to delete from Form Pre-Settings drop-down list, click Delete, and then click OK.

❏You can save up to 20 pre-settings.

Printing Tasks 57