Epson M8000 An undefined error occurs (Macintosh only), The printer does not print normally via the network interface

EPSON AcuLaser M8000 Series User's Guide

	Cause	What to do

	For Macintosh users only	The printer cannot print binary data when it is connected to the
	The print setting in the application is set to Binary	computer via the USB interface. Make sure that the print setting
	The print setting in the application is set to Binary	in the application is set to ASCII encoding.
	encoding.	in the application is set to ASCII encoding.
	encoding.

The printer does not print normally via the network interface

	Cause	What to do

	For Windows users only	If the file is created in an application that allows you to change
	The Data Format setting is different from the data format	the data format or encoding, such as Photoshop, make sure that
	The Data Format setting is different from the data format	the setting in the application matches that in the printer driver.
	setting specified in the application.
	setting specified in the application.

	For Windows users only	Make sure that both the Send CTRL+D Before Each Job and
	The computer is connected to the network using	Send CTRL+D After Each Job settings are set to No.
	The computer is connected to the network using
	AppleTalk in a Windows 2000 environment, and the
	Send CTRL+D Before Each Job or Send CTRL+D After
	Each Job setting on the Device Settings sheet of the
	printer’s Properties dialog box is set to Yes.

	For Windows users only	Click Advanced on the PostScript sheet ofthe printer’sProperties,
	The print data is too large.	then change the Data Format setting from ASCII data (default) to
	The print data is too large.	TBCP (Tagged binary communications protocol).
		TBCP (Tagged binary communications protocol).
		When the Binary setting is set to On, TBCP is not available. Use the
		Binary protocol. See “PS3 Menu” on page 82 for details.

	For Windows users only	Click Advanced on the PostScript sheet ofthe printer’sProperties,
	Printing cannot be performed using the network	then change the Data Format setting from ASCII data (default) to
	Printing cannot be performed using the network	TBCP (Tagged binary communications protocol).
	interface.	TBCP (Tagged binary communications protocol).
	interface.
		When the Binary setting is set to On, TBCP is not available. Use the
		Binary protocol. See “PS3 Menu” on page 82 for details.

An undefined error occurs (Macintosh only)

Cause	What to do

The version of the Mac OS that you are using is	This printer’s driver can only be used on Macintosh computers
unsupported.	running Mac OS X version 10.3.9 or later.

Troubleshooting 201