EPSON AcuLaser M8000 Series User's Guide

Time Setting

Specifies the current date and time by entering them directly.

Date Format

Specifies the format to display the date.

Parallel Menu

These settings control communication between the printer and the computer when using the parallel interface.

Item

Settings (default in bold)

 

 

Parallel I/F*1

On, Off

Speed*1*2

Fast, Normal

Bi-D*1*2

ECP, Off, Nibble

Buffer Size*1*2

Normal, Maximum, Minimum

*1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again.

*2 Available only when USB I/F is set to On.

Parallel I/F

Allows you to activate or deactivate the parallel interface.

Speed

Specifies the pulse width of the ACKNLG signal when receiving data in the Compatibility mode or Nibble mode. When Fast is selected, the pulse width is about 1 μs. When Normal is selected, the pulse width is about 10 μs.

Bi-D

Allows you to specify the bidirectional communication mode. When you select Off, bidirectional communication is disabled.

Using the Control Panel 78