EPSON AcuLaser M8000 Series User's Guide

Cause

What to do

 

 

The size of loaded paper differs from the control panel

Make sure that the correct paper size and paper source are set in

or printer driver settings.

the control panel or printer driver.

 

 

Too many sheets may be loaded in the MP tray or paper

Make sure that you have not tried to load too many sheets of

cassettes.

paper. For the maximum paper capacity for each paper source,

 

see “General” on page 231.

 

 

If paper does not feed from the optional paper cassette

For instructions on installing the unit, see “Optional Paper

unit, the unit may not be installed properly.

Cassette Unit” on page 108.

 

 

The pickup roller is dirty.

Clean up the pickup roller. For instructions, see “Cleaning the

 

pickup roller” on page 149.

 

 

The optional paper cassette may not be installed

See “Optional Paper Cassette Unit” on page 108 for instructions

properly.

on installing an optional paper cassette unit.

 

 

Paper cannot be output to the Stacker

Cause

What to do

 

 

The Stacker is not installed correctly.

Print a configuration status sheet to see if the Stacker is installed

 

correctly. See “Printing a Configuration Status Sheet” on page

 

184.

 

If the Stacker is not installed correctly, turn off the printer and

 

reinstall the Stacker properly.

 

 

Problems Using Options

To confirm your options are installed correctly, print a configuration status sheet. See “Printing a Configuration Status Sheet” on page 184 for details.

The message Invalid AUX I/F Card appears on the LCD panel

Cause

What to do

 

 

The printer cannot recognize the installed optional

Turn off the printer, then remove the card. Make sure the interface

interface card.

card is of a supported model.

 

 

Troubleshooting 195