EPSON AcuLaser M8000 Series User's Guide
❏Be sure the AC power cord meets the relevant local safety standards. Use only the power cord that comes with this product. Use of the another cord may result in fire or electric shock. This product’s power cord is for use with this product only. Use with other equipment may result in fire or electric shock.
❏If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in the plug, make sure you replace them with fuses of the correct size and rating.
❏Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
❏Avoid using an electrical outlet that is controlled by wall switches or automatic timers. Accidental disruption of power can erase valuable information in your computer’s and printer’s memory.
❏Make sure that there is no dust on the socket.
❏Be sure to insert the plug completely into the electrical outlet.
❏Do not handle the plug with wet hands.
❏Unplug this printer from the wall outlet and refer servicing to a qualified service representative under the following conditions:
A.When the power cord or plug is damaged or frayed.
B.If liquid has been spilled into it.
C.If it has been exposed to rain or water.
D.If it does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
E.If it has been dropped or the cabinet has been damaged.
F.If it exhibits a distinct change in performance, indicating a need for service.
❏Avoid sharing outlets with other appliances.
❏Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
Safety Instructions 14