EPSON AcuLaser M8000 Series User's Guide

5.Select the OS that you are using and the Yes or No check box depending on whether you want to share your printer on the network or not. Then click Next.

Note:

❏When using setup.exe to do the installation, you can select a platform, different from the current Windows OS, in Available Platforms. This is so that when you perform an installation using Point & Print, you can upload printer drivers for other platforms.

❏If you are installing a printer driver for the PC that you are currently using, select the Windows OS that is the platform of your PC. If you select a different Windows OS, the printer driver will not be installed correctly.

6.Confirm the printer port you want to use is selected and your printer name is shown. If not, select the port you want to use from the drop-down list and type your printer.s name in the Printer Name box. Select the Yes or No check box depending on whether you want to set this printer as the default printer. Then click Next.

7.You can start the installation now. Click Finish to continue.

8.Installation is complete. Click Exit to Windows.

After the installation is done, click Printer Properties to make the appropriate settings.

Note:

If you want to change the settings, you can access the PCL6 printer driver by clicking Document Default.

Accessing the PCL6 printer driver

You can change the PCL6 printer settings in the PCL6 printer driver. To access the printer driver, see “Accessing the printer driver” on page 204.

Updating the printer driver

When you install optional products, you have to update the printer driver manually. See the following instructions.

1.Click the Printer tab of the Properties dialog box.

2.Select the option that you installed.

About the PCL Printer Driver 228