EPSON AcuLaser M8000 Series User's Guide

The printer has encountered problems during duplex printing. Make sure you are using an appropriate type and size of paper for the duplex printing. The problem could also be a result of incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the rest of the print job on only one side of the paper. Press the + Cancel Job button to cancel the print job.

Can’t Use Bookmark

The registered menu cannot be used because the menu is disabled by changing any settings after registered the menu in bookmark.

CF CHECK

The printer is checking the CompactFlash memory.

Check Duplex Paper Size

The paper size loaded in the printer is not appropriate for the optional Duplex Unit. Load correct paper size and press the Start/Stop button to resume printing.

Check Paper Size

The paper size setting is different from the size of paper loaded in the printer. Check to see if the correct size of paper is loaded in the specified paper source.

To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access the control panel menus” on page 64 for instructions.

Check Paper Type

The paper loaded in the printer does not match the paper type setting in the printer driver. Paper that matches only the paper size setting will be used for printing.

To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access the control panel menus” on page 64 for instructions.

Check Selected Outbin

The printouts are output on the face-down tray because the paper size or paper type is not supported by the stacker.

Collate Disabled

Using the Control Panel 93