EPSON AcuLaser M8000 Series User's Guide

Paper Size:

Mon, C10, DL, C5, C6, IB5

Paper Source: MP Tray

Note:

❏Depending on the quality of envelopes, the printing environment, or the printing procedure, envelopes might be wrinkled. Make a trial print run before you print on a lot of envelopes.

❏Duplex printing is not available for envelopes.

❏When printing on envelopes, open cover B, and then push up the form feed pressure change levers at both sides of the fuser unit until they are in the vertical position. It may reduce the wrinkles in the envelopes. When using paper other than envelopes, be sure to push the lever back down.

wUnless specifically instructed in this guide, be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use,

the fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to allow the heat to subside before doing so.Warning:

Thick paper

Available paper source:

Printing Tasks 41