EPSON AcuLaser M8000 Series User's Guide

Selects whether the printer prints a slashed or unslashed zero.

CharacterSet

Selects character table 1 or 2.

Password Config Menu

Item

Settings (default in bold)

 

 

Password Config*

-

Limitation

Disable, Interface, Config, All

 

 

*The default password is blank. You can enter up to 20 characters for the password.

Password Config

Changes the password. Enter the old password first and then enter the new password twice.

To enter the password, press the d Down or u Up button to select the character and press the r Right button to determine the character. After all characters are determined, press the OK button.

Limitation

Changes the restriction range. When Interface is selected, the password is required to change the settings in the USB and Network menus. When Config is selected, the password is required to enter Quick Print Job or Confidential Job, or to change the settings in all menus. When All is selected, the password is required to enter Quick Print Job or Confidential Job, or to change the settings and to perform the items in all menus. Before changing the setting, you have to enter the password set in the Password Config setting.

Support Menu

Enter the Support Mode by pressing the d Down button while turning the printer on, to make Support Menu and Printer Adjust Menu appear.

Using the Control Panel 90