Epson S1C63558 CHAPTER 1 OUTLINE, 1.1 Features

CHAPTER 1: OUTLINE

CHAPTER 1 OUTLINE

The S1C63558 is a microcomputer which has a high-performance 4-bit CPU S1C63000 as the core CPU, ROM (8,192 words ⋅ 13 bits), RAM (5,120 words ⋅ 4 bits), serial interface, watchdog timer, programmable timer, time base counters (2 systems), SVD circuit, a dot-matrix LCD driver that can drive a maximum 40 segments ⋅ 17 commons, DTMF/DP generator, FSK demodulator and sound generator built-in. The S1C63558 features high speed operation and low current consumption in an operating voltage range (2.2 V to 5.5 V), this makes it suitable for applications working with batteries. It is also suitable for caller ID and portable data bank systems because it has a large capacity of RAM built-in.

1.1 Features

OSC1 oscillation circuit ......................	32.768 kHz (Typ.) crystal oscillation circuit
OSC3 oscillation circuit ......................	3.58 MHz (Typ.) ceramic oscillation circuit
Instruction set .....................................	Basic instruction:	46 types (411 instructions with all)
	Addressing mode: 8 types
Instruction execution time ...................	During operation at 32.768 kHz: 61 µsec			122	µsec	183	µsec
	During operation at 3.58 MHz: 0.56 µsec			1.12	µsec	1.68	µsec
ROM capacity .....................................	Code ROM:	8,192 words ⋅	13 bits
	Data ROM:	2,048 words ⋅	4 bits (= 8K bits)
RAM capacity ......................................	Data memory:	5,120 words ⋅	4 bits

	Display memory: 816 bits (192 words ⋅ 4 bits + 48 ⋅			1 bit)
Input port .............................................	8 bits	(Pull-up resistors may be supplemented ∗ 1)
Output port ..........................................	12 bits	(It is possible to switch the 8 bits to special output ∗ 2)
I/O port ................................................	16 bits	(It is possible to switch the 2 bits to special output and
		the 4 bits to serial I/F input/output ∗ 2)
Serial interface ....................................	2 ch.	(8-bit clock synchronous or asynchronous system is selectable)
LCD driver ...........................................	40 segments ⋅ 8, 16 or 17 commons (∗ 2)/48 segments ⋅			8 commons (∗ 1)
Time base counter ..............................	2 systems (Clock timer, stopwatch timer)
Programmable timer ...........................	Built-in, 2 inputs ⋅ 8 bits, with event counter function
Watchdog timer ...................................	Built-in
DTMF generator .................................	Built-in
DP generator ......................................	Built-in
FSK demodulator ................................	Built-in	(Compatible with ITU-T V.23/Bell 202)
Sound generator .................................	With envelope and 1-shot output functions
Supply voltage detection (SVD) ..circuit 12 values, programmable (2.20 V to 3.30 V)
	(It is possible to switch 1 value to the external voltage detection ∗ 1)
External interrupt ................................	Input port interrupt:		2 systems
Internal interrupt .................................	Clock timer interrupt:		4 systems
	Stopwatch timer interrupt:		2 systems
	Programmable timer interrupt: 2 systems
	Serial interface interrupt:		6 systems
	Dialer interrupt:		1 system
	FSK interrupt:		2 systems
Power supply voltage .........................	2.2 V to 5.5 V
Operating temperature range .............	-20°C to 70°C

Current consumption (Typ.) ................	Low-speed operation (OSC1: crystal oscillation):
	During HALT (32 kHz)	3.0 V (LCD power OFF)	1.5	µA
		3.0 V (LCD power ON)	4	µA
	During operation (32 kHz)	3.0 V (LCD power ON)	10	µA
	High-speed operation (OSC3: ceramic oscillation):
	During operation (3.58 MHz)	3.0 V (LCD power ON)	600	µA
	During FSK operation	5.5 V (LCD power ON)	1,800	µA
Package ..............................................	QFP15-128pin (plastic) or chip
	∗ 1: Can be selected with mask option ∗ 2: Can be selected with software

S1C63558 TECHNICAL MANUAL EPSON 1