Extron electronic DDS 402 Advanced Configuration menu, Exit menu, Picture Adjustments menu, QS-4

Quick Start — DDS 402, cont’d

4Advanced Configuration menu

Output	Edge Smoothing	Smooth edges	Top Blanking Bot		Set top and bottom blanking
Configuration	OFF <ON>	• On (default)	000	000	• 0 to 237, top and bottom
		• Off			(Adjust	for top,
MENU	NEXT			NEXT	Adjust	for bottom)

Advanced		Blue Mode		Display blue and sync only		RGB Delay	RGB delay time (in seconds)
Configuration	NEXT	OFF	<ON>	• On		0.7 Seconds	• 0.0 to 5.0 seconds in 0.1 sec.
				• Off (default)			increments (0.7 second default)
MENU		NEXT				NEXT
Exit		Test Pattern		Set test pattern type		Press and Hold	To reset the scaler, press
Menu			Off	• Off (default)	• Alt Pix	FREEZE to Reset	and hold the Freeze button
				• Color Bars	• Film aspect 1.78		until the reset message
			NEXT	• Crosshatch	• Film aspect 1.85	NEXT	displays.
				• 4 x 4 crosshatch • Film aspect 2.35			*Adjust knobs do not affect
	Use either Adjust			• Grayscale	• Ramp		this submenu
				• Crop
	knob to adjust the
	submenus

5Exit menu

Display

Cycle

NEXT

Advanced	MENU	Exit	MENU	Input
Configuration		Menu		Configuration

Picture Adjustments menu

CENTER SIZE

Power	Extron		60-426-01		Display
on	DDS 402	2 sec.	Version x.xx	2 sec.	Cycle
	BRT/CONT	ZOOM	DETAIL

Horz Cntr Vert Horz Size Vert Brt	Cont	Zoom	Horz	Filter Vert
001	000		001	000

10 sec. timeout

NOTE The Adjust knob and the Adjust knob are used to adjust the image settings on the left and right sides of the LCD screen, respectively.

Executive Mode menu

Display

Cycle

Press both buttons simultaneously for 2 seconds

CENTER	ZOOM
Executive Mode	Executive Mode
Enabled	Disabled

10sec. timeout

QS-4