Care and cleaning

US CA

Removing and replacing the sliding shelves and side racks

1To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf and the sliding frame together), tilt upwards and pull it out of the oven.

2	To remove the side racks, gently push the retaining wire from underneath the lock stud, then
	swing the lowest edge of the side rack up and out towards the center of the oven until the rack
	is almost horizontal. The prongs at the top will slide out		Mounting slots
	of the mounting slots.		Mounting slots
	of the mounting slots.
3	To replace the side racks, hold them almost horizontally
	and locate the prongs into the small mounting slots at the
	top of the oven cavity. While you are doing this, support
	the rack with your hand from underneath, to ensure that
	both prongs perfectly locate into the mounting slots.
4	Lower the side racks carefully and gently place the
	retaining wire underneath the lock stud.	Lock stud
	Important!	Lock stud
	Important!	Retaining wire
	Do not lower the side racks until the prongs are fully

inserted into the slots so that you do not chip the porcelain enamel.

Manual cleaning and maintenance

Important!

Do not use harsh/abrasive cleaning agents, waxes, scourers, sharp metal scrapers, polishes or commercial oven cleaners to clean your oven, as these will permanently damage the surfaces. If you choose to use a stainless steel cleaner, please read the label to make sure it does not contain chlorine compounds. These are corrosive and may damage your oven’s appearance. Clean the stainless steel surfaces in the same direction as the grain, in a horizontal motion.

Do not clean or use any oven cleaning products on the door seal or cavity seals (gaskets). Do not rub, damage or move the seals, as they ensure that the oven seals properly and thus operates efficiently.

It may be useful to lock the oven controls before cleaning - see ‘How to lock the control panel’ in ‘User preference settings’ for details.

Cleaning the stainless steel surfaces

Wipe with a clean damp cloth and dry with a lint-free cloth.

To reduce marks like fingerprints, use a stainless steel cleaner regularly.

Do not use scourers or other abrasive cleaners as they will permanently damage the surface.

Cleaning the exterior glass surfaces

Use a mild solution of detergent and warm water; use a glass cleaner to remove smears and fingerprints.

Dry with a soft lint-free cloth.

Do not use sharp metal scrapers to clean the glass surfaces.

Note: the interior oven door glass will be cleaned during a self-clean cycle.

OB30 specifications

The Fisher & Paykel OB30 is an innovative built-in oven designed to meet the demands of modern kitchens, offering a blend of advanced technology, practicality, and stylish design. With its spacious 30-inch interior, the OB30 provides ample cooking capacity for both everyday meals and elaborate dinner parties, accommodating a variety of dishes simultaneously.

One of the standout features of the OB30 is its multifunction cooking system, which allows users to select different cooking modes tailored to specific culinary needs. From baking and grilling to roasting and convection cooking, this oven ensures perfectly cooked meals every time. The convection baking feature utilizes a fan to circulate hot air throughout the oven, resulting in even cooking and reduced cooking times.

The OB30 is equipped with a range of smart technologies that enhance both performance and usability. The self-cleaning function utilizes high temperatures to burn away food residue, making post-cooking cleanup effortless. Additionally, the oven features an intuitive touchscreen interface that is user-friendly and provides easy access to all cooking functions and settings.

Performance is further enhanced by the powerful heating elements, which deliver rapid preheating and consistent temperatures for precise cooking results. The oven also boasts a maximum temperature of up to 500 degrees Fahrenheit, making it suitable for various cooking techniques, including baking artisan bread or searing meats.

The design of the Fisher & Paykel OB30 is sleek and sophisticated, featuring a stainless steel finish that complements any kitchen decor. Its flush installation allows it to seamlessly integrate into cabinetry, providing a clean and modern aesthetic.

Energy efficiency is another important aspect of the OB30. Fisher & Paykel has engineered this oven to meet high energy rating standards, ensuring that it uses energy wisely without compromising on performance. The oven also features multiple shelf positions, allowing for versatile cooking options and maximizing the use of space.

Safety is prioritized in the OB30, with features such as a cool-to-touch door and a child lock option, ensuring peace of mind for families and busy households.

In summary, the Fisher & Paykel OB30 is a remarkable built-in oven that combines modern technology with stylish design, delivering exceptional cooking performance and convenience. Whether you're a seasoned chef or a home cook, the OB30 is a valuable addition to any kitchen, designed to inspire culinary creativity while making the cooking process enjoyable and efficient.

Fisher & Paykel OB30 Care and cleaning, Removing and replacing the sliding shelves and side racks

Models: OB30