Frymaster BIGLA30 warranty CE Standard, CE Approved Gas Categories by Country

CE Approved Gas Categories by Country

COUNTRIES	CATEGORIES	GAS	PRESSURE (MBAR)
AUSTRIA (AT)	II2H3B/P	G20	20
		G30, G31	50
BELGIUM (BE)	I2E(R)B	G20, G25	20, 25
	I3+	G30, G31	28-30, 37
DENMARK (DK)	II2H3B/P	G20	20
		G30, G31	30
	II2Esi3+	G20, G25	20, 25
FRANCE (FR)		G30, G31	28-30, 37
	II2Esi3P	G20, G25	20, 25
		G31	50
FINLAND (FI)	II2H3B/P	G20	20
		G30, G31	30
	II2ELL3B/P	G20, G25	20
GERMANY (DE)		G30, G31	50
	I3P	G31	50
GREECE (GR)	II2H3+	G20	20
		G30, G31	28-30, 37
ITALY (IT)	II2H3+	G20	20
		G30, G31	28-30, 37
IRELAND (IE)	II2H3+	G20	20
		G30, G31	28-30, 37
LUXEMBOURG (LU)	II2E3B/P	G20	20
		G30, G31	50
	II2L3P	G25	25
NETHERLANDS (NL)		G31	50
	II2L3B/P	G25	25
		G30, G31	30
NORWAY (NO)	I3B/P	G30, G31	30
PORTUGAL (PT)	II2H3+	G20	20
		G30, G31	28-30, 37
	II2H3+	G20	20
SPAIN (ES)		G30, G31	28-30, 37
	II2H3P	G20	20
		G31	37, 50
SWEDEN (SE)	II2H3B/P	G20	20
		G30, G31	30
UNITED KINGDOM (UK)	II2H3+	G20	20
		G30, G31	28-30, 37

CE Standard

Required airflow for the combustion air supply is 2m3/h per kW.

1.Connect the quick-disconnect hose to the fryer quick-disconnect fitting under the front of the fryer and to the building gas line.

NOTE: Some fryers are configured for a rigid connection to the gas supply line. These units are connected to the gas supply line at the rear of the unit.

When using thread compound, use very small amounts on male threads only. Use a pipe thread compound that is not affected by the chemical action of LP gases (Loctite™ PST56765 Sealant is one such compound). DO NOT apply compound to the first two threads. Doing so may allow some of the compound to enter the gas stream, resulting in clogging of burner orifices and/or the control valve.

2.Open the gas supply to the fryer and check all piping, fittings, and gas connections for leaks. A soap solution should be used for this purpose.

2-6