Frymaster BIGLA30 warranty Ce Gas Conversion Instructions

Conversion of this appliance from one type of gas to another should only be performed by qualified, licensed, and authorized installation or service personnel, as defined in Section 1.6 of this manual.

BIGLA30 LOV™ gas fryers manufactured for Non-CE countries use different burners for each type gas. The burners in fryers built for propane gas have a special gray-colored coating on the burner tiles to enable them to withstand the higher caloric value of the propane gas. Burners designed for use in propane units may be used in natural gas applications, but not vice versa.

Non-CE Gas Conversion Kits

Natural Gas to Propane (LP) Gas	Propane (LP) Gas to Natural Gas
Full Vat before 09/10: PN 826-2527	Full Vat before 09/10: PN 826-2528
Dual Vat before 09/10: PN 826-2529	Dual Vat before 09/10: PN 826-2530
Full Vat after 09/10: PN 826-2965	Full Vat after 09/10: PN 826-2967
Dual Vat after 09/10: PN 826-2966	Dual Vat after 09/10: PN 826-2968
Non-CE Gas Conversion Kits for Australia
Natural Gas to Propane (LP) Gas	Propane (LP) Gas to Natural Gas
Full Vat before 09/10: PN 826-2745	Full Vat before 09/10: PN 826-2747
Dual Vat before 09/10: PN 826-2746	Dual Vat before 09/10: PN 826-2748
Full Vat after 09/10: PN 826-2969	Full Vat after 09/10: PN 826-2971
Dual Vat after 09/10: PN 826-2970	Dual Vat after 09/10: PN 826-2972

Units manufactured for export to CE countries are equipped with “universal” burners that may be used with either Natural (G20, G25) gas or Butane (G30) and Propane (G31) gasses.

CE Gas Conversion Kits for Units with Gas Valve 810-1715

G20 or G25 (Natural) to G30 or G31 Gas:	G30 or G31 to G20 or G25 (Natural) Gas:
before 09/10 PN 826-2973	before 09/10 PN 826-2974
after 09/10 PN 826-2975	after 09/10 PN 826-2976

CE GAS CONVERSION INSTRUCTIONS

1.Between G20- and G25-type Natural Gas, adjust the gas pressure at the regulator. (Refer to the CE Standard Burner Manifold Gas Pressure Chart.) Do not change the orifice.

2.Between a 2nd family (G20 or G25) and a 3rd family gas (G30 Butane or G31 Propane):

a.Change the orifices.

b.Adjust the manifold pressure.

3.Remove the old rating plate and return to Frymaster. Affix the new rating plate included with the conversion kit in place of the old rating plate stating the gas has been converted.

4.If the destination language changes, replace the rating plate. Call your local service agency or KES for a label kit. The language of reference will be on the corner of the label.

2-8