2. Press the 9 (1 yes) button to continue.
The computer displays filter NOW? Alternating with YES/NO.
3. Go to step 1 section 5.3 on page
5.4Troubleshooting the Auto Intermittent Filtration (AIF) 5.4.1 Incomplete Filtration
Should the AIF procedure fail after the filter pad was changed an error message is generated. Use the chart on page
The computer displays IS VAT FULL? alternating with yes no. The MIB board displays three horizontal lines.
1.If the vat is full press the 9 (1 yes) button to continue. The computer returns to idle cook mode or OFF.
If the pot is not filled completely continue to next step.
2. Press 8 (2 NO) if pot is not filled completely.
The computer displays FILLING while the pump runs again. When the pump stops, the computer displays IS VAT FULL? alternating with yes no again. If the vat is full go to step 1. If the vat is not completely filled continue.
3. Press 8 (2 NO) if pot is not filled completely.
The computer displays FILLING while the pump runs again. When the pump stops, the computer displays IS VAT FULL? alternating with yes no again. If the vat is full go to step 1. If the vat is not completely filled continue.
4.Press 8 (2 NO) if pot is not filled completely. If this is the second consecutive sequence of incomplete filtration skip to step 8.
The computer displays CHANGE FILTER PAD? alternating with YES NO and an alarm.
5. Press 9 (1 yes) to continue.
Pressing 8 (2 NO) allows the fryer to return to cook mode in most cases for four minutes or 15 minutes if the pad is expired*, ending with the CHANGE FILTER PAD? alternating with YES NO display. This repeats until YES is chosen.
The computer displays REMOVE PAN.
